Fabrication / Welder - Immediate Hire

Fabrication / Welder - Immediate Hire

Dallas, United States

Company
Primoris Services Corp.
Location
Dallas, TX
Posted
3 days ago
Via
via Jooble
Apply On

Job Description
Report to and assist immediate supervisor.
Perform quality work as determined by project specifications.
Accountable for all tools and materials at the end of your shift.
Must work well as part of a team.
Functional Requirements Measure distance from grade stakes
Drive stakes
Stretch tight line
Grade stacks from lumber for reuse
Level earth to fine grade specifications with shovel to assist in pipe laying, and preparing sub grades and other excavations
Direct other laborers in dumping concrete into forms
Erect shoring and braces and paints pipe joints with sealing compound
Assist in setting pumps and setting well-points
May assist heavy construction equipment operator in aligning and moving equipment such as cranes, power shovels and backhoes, verifying grades and signaling operators to adjust machines to conform to grade specifications.
Directs truck drivers and scraper operators to dumping positions to maintain grades as directed by Grading Foreman or Dumping Foreman.
Work in a concrete paving crew, adding to or removing concrete from in front of concrete finishing machines so that correct grade will be met
Occasionally use small power tools
May work as lead man in a labor crew
Will usually exercise considerable independent judgement to plan work of a routine nature; accepts responsibility for several phases and expedites that work without having to be told or be explained the procedure for performing duties
Other related duties as required.
Qualification Standards Post-offer drug/alcohol screen and physical evaluation.
Applicant/employee must not pose a direct threat to the health or safety of such individual or others in the workplace.
Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.).
Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.).
Physical Requirements Must comply with company’s drug and alcohol abuse policy.
Must be able to pass physical examination, pre-employment if necessary, and as required by the company.
Able to climb and maintain balance on ladders, scaffolding, stairways, etc.
Stoop, kneel, crouch, crawl, or work at elevated heights as well as in confined spaces (towers, vessels, excavations, etc.).
Able to carry 50 lbs. of tool and/or materials. It is recommended to get assistance to lift items over 50 lbs. Check with your project supervisor or project safety director.
Must be able to stand or walk for long periods of time.
Must be able to work extended hours on your feet on uneven surfaces (dirt, concrete, asphalt, mud, gravel, etc.)
Must be clean shaven and able to work while wearing a respirator and other personal protective equipment, when required.
Location: industrial construction sites and/or fabrication shop
Mobility Barriers to Access Job Site Uneven ground level
Obstructed pathways
Work performed at low and/or high elevations
Work performed in confined areas

Climatic/Environmental Conditions at Job Site Predominately outdoor climate
May be exposed to extreme hot or cold weather
Excessive humidity, rain, etc.
Various noise levels caused by tools, machinery, equipment, etc.
Potential exposure to chemical substances

Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

#J-18808-Ljbffr Primoris Services Corp.
More Jobs
Pipe Welder
Action Group Staffing  · 21 an hour
Welder III
GE Vernova  · 2 days ago
Aluminum Welder (6G MIG)
RMS Energy  · 3 days ago
Welder (TIG/Stick) - Mon-Fri with Benefits
Republic Refrigeration  · 2 days ago
Field Service Welder
Badger Industries  · 2 days ago
Welder
Aerotek  · 20–23 an hour  · 3 days ago

Frequently Asked Questions

Quick answers about Welder Jobs in United States

Q What is the median annual salary for welder jobs in the United States in 2026?
According to the Bureau of Labor Statistics, the median annual wage for welders, cutters, solderers, and brazers in the United States is $51,750 as of May 2026. The lowest 10 percent earn less than $39,890 annually, while the highest 10 percent earn more than $68,210. Wages vary by industry, with structural metals manufacturing paying a median of $55,420.
Q What visa options are available for foreign welders to work in the United States in 2026?
USCIS offers H-2B visas for temporary non-agricultural welders, with a cap of 66,000 visas for FY 2026 split between 33,000 for first half and 33,000 for second half. Employers must file Form I-129 at least 75 days before work start and obtain a temporary labor certification from DOL. Permanent residency via EB-3 requires Schedule A designation for skilled welders with 2 years experience.
Q What education and experience are required for entry-level welder jobs in the US?
The Department of Labor states that entry-level welders typically need a high school diploma or equivalent and completion of a 6-18 month apprenticeship program with 2,000 hours of paid on-the-job training. No prior experience is required for registered apprenticeships, but basic math and blueprint reading skills are essential. Most programs require applicants to be at least 18 years old.
Q What documents are needed to apply for welder apprenticeship programs in the United States?
DOL requires submission of a high school diploma or GED, proof of age (18+), a valid driver's license, and a drug test result for welder apprenticeship applications. Additional documents include a resume listing any metalworking experience and results from an aptitude test administered by the sponsor. Applications must be submitted through the Apprenticeship.gov portal by the program's deadline.
View all 8 FAQs