Traveling Bridge Fitter/Welder
Houston, United StatesCompany
Tradesmen International, Inc.
Location
Houston, TX
Posted
1 day ago
Via
via Tradesmen International
Apply On
Job Description
Description
Tradesmen International is immediately hiring experienced bridge fabrication Structural Fitters, Bridge Sub Arc Welders, and Bridge Flux Core Welders for projects located in the Olean, NY area . The pay rate is $35/hour for less than 10 years of bridge fabrication experience or $45/hour for 10+ years of bridge fabrication experience plus $125/day per diem for Travelers 60+ miles from the job site. Per diem is paid all 7 days of the week if you work the full schedule. If you want to work alongside other proven craftsmen who emphasize safety, productivity and superior craftsmanship, this is your chance to advance your career!
Job Scope:
• Fitters:
• Fit and assemble structural bridge components in a fabrication shop environment
• Read blueprints and WPS sheets to lay out and fit beams, plate girders, stiffeners, diaphragms, splice plates, and other structural members
• Measure, mark, and align heavy steel to required tolerances prior to welding
• Sub Arc Welders:
• Operate Submerged Arc Welding (SAW) equipment to weld structural bridge components in a fabrication shop
• Weld heavy plate, beams, girders, and bridge assemblies using Sub Arc processes
• Set and monitor wire feed, voltage, travel speed, and flux coverage to maintain proper penetration and bead profile
• Work from blueprints and WPS to complete production welds in accordance with AWS D1.5 Bridge Welding Codes
• Flux Core Welders:
• Perform FCAW welding on structural bridge components in a fabrication shop environment
• Weld heavy structural steel including plate, beams, stiffeners, diaphragms, and structural assemblies used in bridge construction
• Follow WPS procedures to maintain proper voltage, travel speed, and penetration. Perform multi-pass welds on thick structural material while maintaining required bead profile and fusion
• Ensure welds meet AWS D1.5 Bridge Welding Code standards and pass required inspections
Requirements
• Must have welding experience in a bridge fabrication shop
• Execute welds in compliance with AWS D1.5 Bridge Welding Code standards
• Ability to consistently maintain weld quality that meets visual and NYS DOT requirements
• Pass on-site 3G FCAW weld test subject to bend and X-ray inspection to meet NYS DOT requirements
• Execute welds in compliance with AWS D1.5 Bridge Welding Code standards
Company Details
Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry.
Our comprehensive benefits include:
• Tradesmen+ Rewards Program – earn points for hours worked
• Vacation Pay
• Health insurance
• 401(k) retirement savings plan
Tradesmen International is an EO employer - M/F/Veteran/Disability
“ Be Safe” from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other “up front” costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, pleasecall or visit your closest Tradesmen office (https://www.tradesmeninternational.com/directory/) to verify the request.
Click here to visit Tradesmen’s full website. (http://www.tradesmeninternational.com)
Location
US-TX-HOUSTON
Posted Date 1 hour ago (5/20/2026 3:31 PM)
Req ID 2026-366555
Category Welder - Welder
Travel Yes
Job Board SPS Team
Location US-TX-HOUSTON
Tradesmen International is immediately hiring experienced bridge fabrication Structural Fitters, Bridge Sub Arc Welders, and Bridge Flux Core Welders for projects located in the Olean, NY area . The pay rate is $35/hour for less than 10 years of bridge fabrication experience or $45/hour for 10+ years of bridge fabrication experience plus $125/day per diem for Travelers 60+ miles from the job site. Per diem is paid all 7 days of the week if you work the full schedule. If you want to work alongside other proven craftsmen who emphasize safety, productivity and superior craftsmanship, this is your chance to advance your career!
Job Scope:
• Fitters:
• Fit and assemble structural bridge components in a fabrication shop environment
• Read blueprints and WPS sheets to lay out and fit beams, plate girders, stiffeners, diaphragms, splice plates, and other structural members
• Measure, mark, and align heavy steel to required tolerances prior to welding
• Sub Arc Welders:
• Operate Submerged Arc Welding (SAW) equipment to weld structural bridge components in a fabrication shop
• Weld heavy plate, beams, girders, and bridge assemblies using Sub Arc processes
• Set and monitor wire feed, voltage, travel speed, and flux coverage to maintain proper penetration and bead profile
• Work from blueprints and WPS to complete production welds in accordance with AWS D1.5 Bridge Welding Codes
• Flux Core Welders:
• Perform FCAW welding on structural bridge components in a fabrication shop environment
• Weld heavy structural steel including plate, beams, stiffeners, diaphragms, and structural assemblies used in bridge construction
• Follow WPS procedures to maintain proper voltage, travel speed, and penetration. Perform multi-pass welds on thick structural material while maintaining required bead profile and fusion
• Ensure welds meet AWS D1.5 Bridge Welding Code standards and pass required inspections
Requirements
• Must have welding experience in a bridge fabrication shop
• Execute welds in compliance with AWS D1.5 Bridge Welding Code standards
• Ability to consistently maintain weld quality that meets visual and NYS DOT requirements
• Pass on-site 3G FCAW weld test subject to bend and X-ray inspection to meet NYS DOT requirements
• Execute welds in compliance with AWS D1.5 Bridge Welding Code standards
Company Details
Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry.
Our comprehensive benefits include:
• Tradesmen+ Rewards Program – earn points for hours worked
• Vacation Pay
• Health insurance
• 401(k) retirement savings plan
Tradesmen International is an EO employer - M/F/Veteran/Disability
“ Be Safe” from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other “up front” costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, pleasecall or visit your closest Tradesmen office (https://www.tradesmeninternational.com/directory/) to verify the request.
Click here to visit Tradesmen’s full website. (http://www.tradesmeninternational.com)
Location
US-TX-HOUSTON
Posted Date 1 hour ago (5/20/2026 3:31 PM)
Req ID 2026-366555
Category Welder - Welder
Travel Yes
Job Board SPS Team
Location US-TX-HOUSTON
More Jobs
Pipe Welder
Action Group Staffing · 21 an hour
Welder III
GE Vernova · 2 days ago
Aluminum Welder (6G MIG)
RMS Energy · 3 days ago
Welder (TIG/Stick) - Mon-Fri with Benefits
Republic Refrigeration · 2 days ago
Field Service Welder
Badger Industries · 2 days ago
Welder
Aerotek · 20–23 an hour
· 3 days ago
Frequently Asked Questions
Quick answers about Welder Jobs in United States
What is the median annual salary for welder jobs in the United States in 2026?
According to the Bureau of Labor Statistics, the median annual wage for welders, cutters, solderers, and brazers in the United States is $51,750 as of May 2026. The lowest 10 percent earn less than $39,890 annually, while the highest 10 percent earn more than $68,210. Wages vary by industry, with structural metals manufacturing paying a median of $55,420.
What visa options are available for foreign welders to work in the United States in 2026?
USCIS offers H-2B visas for temporary non-agricultural welders, with a cap of 66,000 visas for FY 2026 split between 33,000 for first half and 33,000 for second half. Employers must file Form I-129 at least 75 days before work start and obtain a temporary labor certification from DOL. Permanent residency via EB-3 requires Schedule A designation for skilled welders with 2 years experience.
What education and experience are required for entry-level welder jobs in the US?
The Department of Labor states that entry-level welders typically need a high school diploma or equivalent and completion of a 6-18 month apprenticeship program with 2,000 hours of paid on-the-job training. No prior experience is required for registered apprenticeships, but basic math and blueprint reading skills are essential. Most programs require applicants to be at least 18 years old.
What documents are needed to apply for welder apprenticeship programs in the United States?
DOL requires submission of a high school diploma or GED, proof of age (18+), a valid driver's license, and a drug test result for welder apprenticeship applications. Additional documents include a resume listing any metalworking experience and results from an aptitude test administered by the sponsor. Applications must be submitted through the Apprenticeship.gov portal by the program's deadline.
Latest Articles
